PCIe-6355

  • 所示价格仅供参考,数据来源于官方制造商网站。
  • 有关项目定价、批量折扣和采购支持,请联系我们的销售团队。

$2,999.00

NI PCIe-6355, 80 AI (16-Bit, 1.25 MS/s), 2 AO (2.86 MS/s), 24 DIO, Multifunction I/O Device

Please enable JavaScript in your browser to complete this form.
Target price, estimated delivery time or remarks...
التصنيف:
11 People watching this product now!

National Instruments PCIe-6355 80-Channel 1.25 MS/s Multifunction DAQ

PCIe-6355 80-Channel 1.25 MS/s Multifunction DAQ

The NI PCIe-6355 is a high-channel-count X Series multifunction DAQ device with 80 single-ended or 40 differential analog inputs. It also provides two 2.86 MS/s analog outputs, 24 digital I/O lines and four 32-bit counters.

With a 1.25 MS/s aggregate input rate, it is designed for applications that require both high channel density and faster acquisition than the PCIe-6345.

Key Features of the PCIe-6355

  • 80 single-ended or 40 differential inputs
  • 16-bit, 1.25 MS/s aggregate acquisition
  • Two analog outputs at up to 2.86 MS/s
  • 24 digital I/O lines
  • Four 32-bit counters
  • NI-STC3 timing
  • PCI Express interface
  • NI-DAQmx support

PCIe-6355 Technical Specifications

Product ModelPCIe-6355
Part Number790687-01
Analog Inputs80 single-ended or 40 differential
AI Resolution16 bits
Maximum AI Rate1.25 MS/s aggregate
Input Ranges±0.1 V, ±0.2 V, ±0.5 V, ±1 V, ±2 V, ±5 V and ±10 V
AI FIFO4,095 samples
Analog Outputs2
Maximum AO Rate2.86 MS/s
Digital I/O24 bidirectional lines
CountersFour 32-bit counters
Input ArchitectureMultiplexed
Host InterfacePCI Express
DriverNI-DAQmx

PCIe-6355 Part Number and Accessories

ItemPart NumberDescription
PCIe-6355790687-0180 AI, 1.25 MS/s multifunction DAQ
SHC68-68-EPM192061-02Shielded multifunction cable
SCB-68A782536-01Shielded terminal block
BNC-2110777643-01BNC terminal block
BNC-2115777807-01Extended-I/O BNC block

High-Speed Multichannel Acquisition

The 80 analog inputs support large fixtures and sensor systems. Because 1.25 MS/s is aggregate, the expected per-channel rate should be calculated using the complete scan list.

Analog Output Generation

Two analog outputs provide stimulus generation for closed-loop, component and device-response tests. NI-STC3 timing can synchronize generation with acquisition.

Digital and Counter Resources

Digital lines support fixture control, while the counters perform encoder, PWM, frequency, period and event measurements.

PCIe-6355 Applications

  • High-speed production testing
  • Multichannel sensor acquisition
  • Stimulus-and-response testing
  • Machine monitoring
  • Electronic validation
  • Laboratory automation

High-Throughput Test Systems

The combination of high channel count and faster conversion helps test systems collect more data within a limited production cycle.

Control and Simulation

Analog outputs and counter resources can create stimulus signals while the analog inputs measure system response.

PCIe-6355 Installation Workflow

Step 1: Confirm System Compatibility

Verify PCI Express, NI-DAQmx and operating-system support.

Step 2: Plan Connectivity

Determine the required cables and terminal blocks for all channel groups.

Step 3: Install the Device

Power down the computer and observe ESD precautions.

Step 4: Wire and Label Channels

Document every cable and terminal position.

Step 5: Test in NI MAX

Verify analog input, output, digital and counter functions.

Step 6: Validate Full-Speed Operation

Test buffer handling and per-channel settling at the intended rate.

PCIe-6355 Troubleshooting

Channels on an extended connector are missing

Verify cable placement and physical-channel mapping.

Fast scans produce inaccurate readings

Reduce source impedance or allow more settling time.

Analog output is lower than expected

Check load impedance, output range and offset.

Buffer overflow occurs

Optimize the read loop or lower the acquisition rate.

Noise appears between channel groups

Improve shielding and separate analog wiring from digital and power conductors.

PCIe-6355 Comparison

ModelAIAI RateAO
PCIe-6355801.25 MS/s2
PCIe-634580500 kS/s2
PCIe-63572081.25 MS/s2

PCIe-6355 Frequently Asked Questions

What is the part number?

790687-01.

How many analog inputs are available?

80 single-ended or 40 differential.

What is the input sampling rate?

Up to 1.25 MS/s aggregate.

How many analog outputs are included?

Two outputs at up to 2.86 MS/s.

Does it use simultaneous sampling?

No. It uses multiplexed sampling.

Recommended Related Products

Request a Quote for the PCIe-6355

Contact us for availability and project pricing for the PCIe-6355 790687-01.

Part Number(s): 790687-01

规格

Brand

National Instruments

相关产品

最近浏览

常见问题解答

是的。我们可以通过可靠的供应渠道提供全新原装产品。根据库存情况和客户需求,部分型号也可能提供二手或翻新产品。询价时请确认您所需的产品状况。

请告知我们所需的型号、数量和应用需求。我们将根据您的采购需求提供具有竞争力的报价和项目定价方案。

库存情况会定期变动。部分型号可立即发货,而其他型号则需要工厂订购或采购。请联系我们并提供确切的型号和零件编号,以了解最新的库存情况。

是的,我们为不同国家和地区的客户提供全球运输解决方案。我们可以根据您的目的地和配送要求安排可靠的物流服务。

是的,我们的技术团队可以根据您的应用需求,帮助您验证规格、系统兼容性、配件和产品选择。