cRIO-9057

  • 所示价格仅供参考,数据来源于官方制造商网站。
  • 有关项目定价、批量折扣和采购支持,请联系我们的销售团队。

$5,660.00

1.33 GHz Dual-Core CPU, 2 GB DRAM, 4 GB Storage, -20 °C to 55 °C, Artix 7 100T FPGA, 8-Slot CompactRIO Controller

请在浏览器中启用JavaScript来完成此表单。
目标价格、预计交付时间或备注……
12 People watching this product now!

National Instruments cRIO-9057 8-Slot CompactRIO Controller

The NI cRIO-9057 is a rugged 8-slot CompactRIO embedded controller designed for distributed measurement, industrial automation, machine monitoring, and deterministic real-time control. It combines an Intel Atom dual-core processor, Artix-7 100T FPGA, NI Linux Real-Time, modular C Series I/O, and TSN synchronization into one industrial platform.

Typical applications include:

  • Distributed data acquisition
  • Industrial automation
  • Machine condition monitoring
  • Remote measurement systems
  • Embedded test systems
  • Industrial IoT edge nodes
  • Energy monitoring
  • Synchronized industrial control

Processor and FPGA Architecture

The cRIO-9057 is built around:

  • Intel Atom E3805 dual-core processor
  • 1.33 GHz CPU frequency
  • 2 GB DRAM
  • 4 GB onboard storage
  • Xilinx Artix-7 100T FPGA
  • 8-slot CompactRIO architecture
  • NI Linux Real-Time OS

The Artix-7 100T FPGA provides hardware-level timing, deterministic trigger logic, digital processing, encoder handling, and custom FPGA control logic. NI lists the FPGA resources as 126,800 flip-flops, 63,400 6-input LUTs, 240 DSP slices, 4,860 kbits block RAM, 16 DMA channels, and 32 logical interrupts.

TSN and Synchronization

The cRIO-9057 supports TSN deterministic communication synchronization, making it suitable for multi-node measurement and control systems.

This is useful for:

  • Multi-controller synchronization
  • Distributed machine monitoring
  • Remote data acquisition
  • Industrial Ethernet automation
  • Synchronized test systems
  • Energy and facility monitoring

Compared with older CompactRIO controllers, the cRIO-9057 is better suited for distributed systems that require network-based timing coordination.

Modular C Series Expansion

The cRIO-9057 supports up to 8 NI C Series modules, allowing engineers to configure the system around specific signal and control requirements.

Common module types include:

  • Analog input/output
  • Digital I/O
  • Temperature measurement
  • Strain and bridge measurement
  • Vibration and IEPE acquisition
  • CAN / CAN FD communication
  • LIN communication
  • Industrial communication interfaces

The 8-slot architecture makes the cRIO-9057 better suited than 4-slot models for systems requiring more sensor channels, mixed I/O types, or expanded monitoring points.

Data Acquisition and Real-Time Performance

The cRIO-9057 supports hardware-timed analog and digital tasks through NI-DAQmx and LabVIEW workflows. In NI-DAQmx mode, analog input timing resolution is listed as 12.5 ns, timing accuracy as 50 ppm, and the maximum sample rate depends on the installed C Series modules.

This makes the controller suitable for:

  • Synchronized sensor acquisition
  • Deterministic digital triggering
  • Embedded measurement systems
  • Machine monitoring
  • Test stand automation

Connectivity and Industrial Design

The cRIO-9057 provides:

  • 2 Ethernet controller ports
  • USB connectivity
  • microSD storage support
  • GigE Vision support
  • 8 C Series slots

Industrial characteristics include:

  • -20 °C to 55 °C operating temperature
  • Rugged CompactRIO construction
  • Compact 8-slot embedded design
  • Suitable for industrial cabinets and distributed measurement stations

Application-Oriented Use Cases

Machine Condition Monitoring

With vibration, IEPE, temperature, and analog input modules, the cRIO-9057 can be used for equipment health monitoring, bearing diagnostics, rotating machinery analysis, and predictive maintenance systems.

Distributed Measurement

Its TSN support and Ethernet connectivity make it useful as a synchronized remote acquisition node in factories, energy systems, laboratories, and large test facilities.

Industrial Automation

The controller can run deterministic control tasks through NI Linux Real-Time while using FPGA resources for low-latency timing, triggering, and custom digital control.

Embedded Test Systems

The cRIO-9057 is suitable for test stands that require mixed analog measurement, digital control, sensor acquisition, and real-time execution in one rugged embedded controller.

Comparison with Similar Models

ModelMain DifferenceTypical Use
cRIO-90568-slot, Artix-7 75T FPGA, 1 GB DRAMCost-sensitive 8-slot systems
cRIO-90578-slot, Artix-7 100T FPGA, 2 GB DRAMMid-range distributed control
cRIO-90588-slot, Artix-7 100T, extended temperatureHarsh industrial environments
cRIO-90548-slot, UltraScale FPGAHigher FPGA processing
cRIO-90498-slot, Kintex-7 325T FPGAAdvanced FPGA applications

Compared with cRIO-9056, the cRIO-9057 provides more FPGA resources and more memory, making it better for larger distributed measurement and control tasks.

Compared with cRIO-9058, the cRIO-9057 is more suitable for standard industrial temperature environments, while the cRIO-9058 is better for extended-temperature deployment.

Compared with cRIO-9054 or cRIO-9049, the cRIO-9057 is not intended for the most FPGA-intensive applications, but it offers a practical balance of 8-slot expansion, TSN synchronization, real-time control, and deployment cost.

Conclusion

The NI cRIO-9057 is a rugged 8-slot CompactRIO controller for distributed measurement, industrial automation, machine monitoring, and embedded real-time control.

Its combination of:

  • Intel Atom dual-core processing
  • Artix-7 100T FPGA
  • TSN synchronization
  • NI Linux Real-Time
  • 8-slot C Series expansion
  • Rugged industrial design

makes it a practical choice for engineers building synchronized acquisition systems, remote monitoring platforms, embedded test systems, and distributed industrial control nodes.

Part Number(s): 786427-01

规格

Number of Ethernet Ports on Controller: 2
Slot Count: 8
Conformal Coated: No
FPGA: Artix-7 100T
GigE Vision Support: Yes
Operating Temperature Range: -20 °C to 55 °C
Processor Core: 1.33 GHz Dual Core Intel Atom
RAM Size: 2 GB
Hard Drive Memory Size: 4 GB
Programming Method: LabVIEW FPGA, NI-DAQmx
TSN Enabled: Deterministic Communication, Synchronization

品牌

National Instruments

相关产品

最近浏览

常见问题解答

是的。我们可以通过可靠的供应渠道提供全新原装产品。根据库存情况和客户需求,部分型号也可能提供二手或翻新产品。询价时请确认您所需的产品状况。

请告知我们所需的型号、数量和应用需求。我们将根据您的采购需求提供具有竞争力的报价和项目定价方案。

库存情况会定期变动。部分型号可立即发货,而其他型号则需要工厂订购或采购。请联系我们并提供确切的型号和零件编号,以了解最新的库存情况。

是的,我们为不同国家和地区的客户提供全球运输解决方案。我们可以根据您的目的地和配送要求安排可靠的物流服务。

是的,我们的技术团队可以根据您的应用需求,帮助您验证规格、系统兼容性、配件和产品选择。